|No.56 Huida Road, Zhongyuan District, Zhengzhou, Chinaemail@example.com|
Payment & Shipping Terms:
|Name:||Ring Die Poultry Feed Pelletizer Machine||Usage:||Make Animal, Livestock, Poultry Feed Pellets|
|Raw Material:||According To Formula Of Different Kind Feed Pellets||Pellet Diameter:||2,3,4,5,6,8,10,12mm Or Customized|
|Sfater Sales Service:||Engineer Available Overseas Service||Warranty:||12 Months|
ring die pellet machine,
ring die pelletizer
Ring Die Poultry Feed Pelletizer Machine Animal Feed Pellet Maker
Feed pellets is a kind of food for animal, livestock and poultry, it is produced from grain, soybean mill and other vitamins with certain formula by feed pelletizer. Our animal feed pelletizer is ring die type, which equipped with jacketed conditioner to produce food grade high quality feed pellets.
Ring die animal feed pelletizer is made up of pelletizer main body, feed auger, and conditioner
* Motor and gearbox is transmission system for the pelletizer, motor and gearbox connect directly by coupling, so the motor can drive the gearbox running directly thus to improve transmission efficiency compared with v-belt transmission type pellet mill, because the v-belt transmission type have disadvantage of v-belt slip if pelletizer load is high.
* The roller of ring die feed pelletizer is installed in front of main shaft while ring die is in front of hollow shaft, the rollers are in middle of ring die, when machine working the ring die is rotating and rollers press the powder mesh material into hole of ring die to make pellets.
* The ring die of this animal feed pelletizer is made of 4Cr13 stainless steel, this kind of stainless steel have high hardness and wearing resisting and use stainless steel ring die can make sure the final pellets is comply with food grade. The diameter of holes of ring die decide diameter of pellets, we can supply ring die to make 2mm, 3mm, 4mm, 5mm ,6mm 8mm, 10mm, 12mm diameter feed pellets, we have ability to make ring die with customized pellet diameter.
* The pellet cutter on ring die feed pelletizer is used to cut the pellets, from the cutter can adjust the length of pellets. On ring die feed pellet mill there are two pellet cutters, the blade of pellet cutter is made of high strength alloy steel to assure the cutting effect and lifetime. On the pellet cutter adjust handle there is precise scale, thus to make the adjusting work very easy.
The conditioner is installed on top of ring die animal feed pelletizer main body, the function of this conditioner is to curing the raw material by hot steam before press them into pellets, because if make feed pellets without curing the raw material, it will be hard for animal digest the pellets.
On the conditioner there is connector to connect conditioner to steam boiler by pipeline and pressure gauge to indicate the pressure. The boiler send hot seam to conditioner, raw material come through middle of conditioner and hot steam come through inter layer of conditioner during they passing through the hot seam curing raw material, then material go to pelletizing chamber to be pressed into pellets.
The conditioner is made of stainless steel to make sure the pellets is food grade.
The rotating speed of conditioner is VFD adjustable from 20-120rpm, so that we can control the feeding speed to avoid overload cause pelletizer block.
Technical data of ring die feed pellet machine
|4||Feeding Auger Motor||0.55KW||0.55KW||0.75KW||0.75KW||1.5KW||1.5KW|
|6||Inner Diameter of Die||250mm||320mm||350mm||400mm||420mm||508mm|
|7||Ring Die Speed||305rpm||305rpm||336rpm||307rpm||287rpm||287rpm|
|8||Ring Die Material||4Cr13 (Stainless steel)|
|10||Pellet Size||Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm or customized|
|13||Roller shell material||40CrMnTi, HRC 56-58|
|14||Main shaft material||42 CrMnTi|
|16||Powdered pellet ratio||≤12%|
|17||Pellet stability in water||>20Min|
|19||Die working temperature||≤85℃|
|20||Steam working pressure||0.1-0.4Mpa|
Contact Person: Vincent
Tel: 86- 18639007627